Apr 05, 2023 Leave a message

Commonly Used Varieties Of Refractory Materials

Among ordinary and special refractory materials, the commonly used varieties mainly include the following types:
1. acidic
Silica bricks and clay bricks are used in larger quantities. Silica bricks are silicon products containing more than 93% SiO2, and the raw materials used are silica, waste silica bricks, etc. Silica bricks have strong resistance to acidic slag erosion, but are susceptible to alkaline slag erosion. Its load softening temperature is very high, which is close to its refractoriness. After repeated calcination, the volume does not shrink, or even slightly expands, but its thermal shock resistance is poor. Silica bricks are mainly used in thermal equipment such as coke ovens, glass melting furnaces, and acid steelmaking furnaces. Clay bricks contain 30% to 46% alumina. It uses refractory clay as the main raw material. It has a refractoriness of 1580 to 1770°C and good thermal shock resistance. It is a weakly acidic refractory material and has corrosion resistance to acidic slag. It is a type of refractory material with the largest production volume.
2. Neutral
The main crystal phases in high-alumina products are mullite and corundum. The content of corundum increases with the increase of alumina content. Corundum products containing more than 95% alumina are high-quality refractory materials with wide uses. Chrome bricks are mainly made of chrome ore, and the main crystal phase is chromite. It has good corrosion resistance to steel slag, but poor thermal shock resistance and low deformation temperature under high temperature load. Chrome-magnesia bricks made of chrome ore and magnesia in different proportions have good thermal shock resistance and are mainly used as basic open hearth furnace roof bricks.
Carbonaceous products are another type of neutral refractory materials. According to the composition of carbon-containing raw materials and the mineral composition of products, they are divided into three categories: carbon bricks, graphite products and silicon carbide products. Carbon bricks are made of high-grade petroleum coke, tar and pitch are added as binders, and fired at 1300°C without air. Graphite products (except natural graphite) are made of carbonaceous materials through graphitization treatment at 2500-2800°C in an electric furnace. Silicon carbide products are made of silicon carbide and fired at 1350-1400°C with binders such as clay and silicon oxide. Silicon carbide plus silicon powder can also be made into silicon nitride-silicon carbide products under a nitrogen atmosphere in an electric furnace. Carbonaceous products have low coefficient of thermal expansion, high thermal conductivity, good thermal shock resistance and high strength at high temperature. It does not soften even after long-term use at high temperature, is not corroded by any acid and alkali, has good salt resistance, and is not wetted by metal and slag. It is light in weight and is a high-quality high-temperature resistant material. The disadvantage is that it is easy to oxidize at high temperature and should not be used in an oxidizing atmosphere. Carbonaceous products are widely used in the lining of high-temperature furnaces (furnace bottom, hearth, lower part of the furnace body, etc.), and the lining of non-ferrous metal melting furnaces. Graphite products can be used as linings for reaction tanks and petrochemical autoclaves. Silicon carbide and graphite products can also be made into crucibles for melting copper, gold and light alloys.
3. Alkaline
Represented by magnesium products. It contains more than 80% to 85% of magnesium oxide, with periclase as the main crystal phase. The main raw materials for the production of magnesia bricks are magnesite, seawater magnesia (which is obtained by calcination of magnesium hydroxide extracted from seawater) and so on. Good resistance to alkaline slag and iron slag. The melting point of pure magnesia is as high as 2800°C, so the refractoriness of magnesia bricks is higher than that of clay bricks and silica bricks. Since the mid-1950s, due to the adoption of oxygen-blowing converter steelmaking and the use of basic open hearth furnace roofs, the production of basic refractory materials has gradually increased, while the production of clay bricks and silica bricks has decreased. Basic refractories are mainly used in open hearth furnaces, oxygen-blown converters, electric furnaces, non-ferrous metal smelting and some high-temperature thermal equipment.

Send Inquiry

Home

Phone

E-mail

Inquiry