The difference between corundum castables and corundum mullite castables
Corundum castables are refractory castables prepared with corundum as aggregate and powder plus some binding agents, the main component is α-Al2O3, which belongs to tripartite crystal system. The crystal is short columnar, the real density of 3.85~4.01g/cm3, hardness of 9, melting point of about 2050 ℃, corundum castables, with better resistance to mechanical and abrasion corrosion, but corundum castables shock resistance is a little worse.

Corundum mullite itself naturally found very small, corundum mullite refractory castables raw materials are mostly synthetic, to the high purity of raw materials, high density, good structure, low creep rate, low thermal expansion, good resistance to thermal shock and resistance to chemical erosion and is widely used in the refractory industry.

Add corundum in refractory castables, the aluminum content in the castables will increase, the hardness and strength will be increased, add corundum and mullite in refractory castables, with the increase of aluminum content, its hardness, strength, abrasion resistance and anti-scouring ability can reach a certain ideal range, the scope of application is wider, and the application effect is also better.

Corundum castables and corundum mullite castables are castables in the better castables, specific how to choose, it is recommended or according to the actual situation of their own furnace equipment, combined with the manufacturer's recommendations to choose, the requirements of high seismicity, resistance to chemical attack can choose corundum mullite refractory castables, in addition to these 2 kinds of castables, common castables and high-aluminum castables, abrasion-resistant castables, acid and alkali resistant castables, iron The castable material for iron and steel package and other multi-purpose castables.

If you are interested refractory products, contact us now!
Email: info@zaferroalloy.com Whatsapp: 8615896822096


