Jan 05, 2026 Leave a message

What Is The FOB Price Of Ferrosilicon in China Today

Ferrosilicon export pricing is currently holding in a stable band. In the latest market check, Ferrosilicon 72 is indicated at 1030-1050 FOB Tianjin Port, while Ferrosilicon 75 is indicated at 1090-1120 FOB Tianjin Port. Both grades are unchanged. A flat range like this typically signals a near-term balance between replacement-cost expectations and coverage-driven buying rather than a lack of activity. Deals can still be done, but the market is clearing without a trigger strong enough to force a repricing.

Ferrosilicon
Ferrosilicon
FeSi Lumps
FeSi Lumps

Price Table (FOB Tianjin Port)

 

Product Grade Quotation Change Remarks
Ferrosilicon 72 1030-1050 -- FOB Tianjin Port
Ferrosilicon 75 1090-1120 -- FOB Tianjin Port

 

What the current ranges suggest

 

When both major grades move sideways at the same time, it often indicates that supply and demand are aligned on near-term needs. Sellers appear willing to maintain offer levels, while buyers are booking enough volume to confirm the range but not enough to push it higher. In export markets, this pattern is common when buyers are focused on shipment execution, quality consistency, and timing rather than attempting to anticipate a directional move.

The difference between Ferrosilicon 72 and Ferrosilicon 75 is also consistent with how these grades are used. Grade 75 carries higher silicon content per ton and typically commands a premium because it delivers silicon units more efficiently. For buyers, the meaningful comparison is not only the invoice price per ton, but the cost per effective silicon unit delivered into the melt, adjusted for handling and recovery.

 

Why the market is unchanged

 

A stable ferrosilicon market is often supported by three practical conditions:

1) Sellers are defending replacement economics.
Ferrosilicon production is closely linked to conversion economics and operating discipline. When producers do not see a meaningful cost shift, they tend to hold price bands rather than discount aggressively. This is especially true when order flow is sufficient to keep shipments moving.

2) Availability is normal, but not loose.
If supply were visibly loose at port or if inventories were building rapidly, transaction levels would typically test below the offered range. A stable band suggests availability is adequate for routine export business, but not so abundant that sellers must chase volume.

3) Buying is coverage-driven.
Most buyers of ferrosilicon book on planned consumption. In a stable band, the typical approach is to cover near-term requirements while maintaining flexibility, which supports a range-bound market rather than a directional move.

 

What buyers should watch next

 

If the band is going to move, early signals usually show up in execution behavior. Watch whether deals consistently clear near the top or the bottom of the quoted range. Clustering near the upper end can be an early firming signal. Persistent clearing at the lower end can indicate softer demand or increased competition.

Another useful signal is shipment lead time. If prompt lots become harder to secure, sellers often tighten offers quickly. Conversely, if suppliers become more flexible on shipment windows or if more spot lots are freely offered, the market can soften.

 

Procurement guidance in a stable market

 

In a flat market, buyers can focus on reducing non-price risk. The difference between a smooth shipment and a costly dispute often comes down to specification and traceability rather than a small movement in the headline range.

Lock the technical requirement. Confirm the grade and any impurity limits relevant to your application.

Control physical quality. Specify lump size range and define a practical tolerance for fines if your process is sensitive. Excess fines increase dust loss and can change effective recovery.

Require batch-linked documentation. The lot number on the COA should match packing marks and align with the packing list. This protects repeatability and simplifies receiving.

Align packing and handling expectations. Good packing reduces breakage and helps preserve labeling through transit.

Use split purchasing if you want flexibility. Many buyers book a base volume for continuity and keep optional volume to respond if the market shifts.

 

A short technical note on ferrosilicon

 

Ferrosilicon is a silicon-iron alloy used widely for deoxidation and alloying in steelmaking and foundry operations. While grade names are widely recognized, real performance depends on consistent chemistry, controlled size distribution, and disciplined shipment execution. Buyers who treat ferrosilicon as a controlled input rather than a commodity often achieve better total cost in use.

 

FAQ

 

Q1: What is the current price of Ferrosilicon 72 FOB Tianjin Port?
A: The current indicated range is 1030-1050 FOB Tianjin Port, unchanged.

Q2: What is the current price of Ferrosilicon 75 FOB Tianjin Port?
A: The current indicated range is 1090-1120 FOB Tianjin Port, unchanged.

Q3: Why is Ferrosilicon 75 priced higher than Ferrosilicon 72?
A: Grade 75 delivers higher silicon content per ton and typically commands a premium. Buyers should compare cost per effective silicon unit delivered.

Q4: What could move the market out of the current range?
A: Changes in replacement economics, tightening or loosening spot availability, and shifts in buyer restocking behavior.

Q5: What should buyers check before booking a shipment?
A: Batch-linked COA, lump size range and fines expectations, packing and labeling, and document consistency.

 

About Our Company

 

We are a factory direct supply partner with stable monthly supply capacity and a factory area of about 30,000 m². Our products are exported to 100+ countries and regions, and we have served 5,000+ customers. Our sales team understands industry dynamics and market trends, and we supply ferrosilicon, silicon metal, and other metallurgical products.

 

 

Send Inquiry

Home

Phone

E-mail

Inquiry