(1) Used as deoxidizer and alloying agent in the steelmaking industry. In order to obtain steel with qualified chemical composition and ensure the quality of steel, deoxidation must be carried out in the final stage of steelmaking. The chemical affinity between silicon and oxygen is very large, so ferrosilicon is a strong deoxidizer for steelmaking for precipitation and diffusion. deoxidation. Adding a certain amount of silicon to steel can significantly improve the strength, hardness and elasticity of the steel. Therefore, it is widely used in smelting structural steel (containing 0.40-1.75% silicon), tool steel (containing SiO.30-1.8%), and spring steel. (Containing SiO.40-2.8%) and silicon steel for transformers (containing 2.81-4.8% silicon), ferrosilicon is also used as an alloying agent.

Low carbon ferrosilicon
In addition, in the steelmaking industry, ferrosilicon powder is often used as a heating agent for steel ingot caps to improve the quality and recovery rate of steel ingots by taking advantage of the fact that ferrosilicon powder can release a large amount of heat when burned at high temperatures.
(2) Used as reducing agent in ferroalloy production. Not only is the chemical affinity between silicon and oxygen very high, but the carbon content of high-silicon ferrosilicon is very low. Therefore, high-silicon ferrosilicon (or silicon alloy) is a commonly used reducing agent in the ferroalloy industry when producing low-carbon ferroalloys.

ultra-low carbon ferrosilicon
(3) Use in other aspects. Ground or atomized ferrosilicon powder can be used as a suspended phase in the mineral processing industry. It can be used as a coating for welding rods in the welding rod manufacturing industry. High-silicon ferrosilicon is used in the chemical industry to make products such as silicone.


