Mar 13, 2024 Leave a message

Improve The Smelting Recovery Rate Of Ferrotungsten And Ferromolybdenum

There are the following differences between ferrotungsten and ferromolybdenum furnace production:
(1) Different sources of main raw materials: Since tungsten and molybdenum exist in different mineral forms in the earth's crust, ferrotungsten can be directly smelted with tungsten concentrate, while ferromolybdenum requires molybdenum concentrate (MoS2) to be roasted to obtain molybdenum calcined sand MoO3. smelting;

 

ferro moly price

Ferro Molybdenum Block


(2) The dosage of auxiliary materials is different: Since the melting point of tungsten is higher than the melting point of molybdenum, the required reaction heat is different. The reaction heat per unit material is: tungsten smelting block is greater than 2260872J/kg,
Ferromolybdenum only needs to be larger than 2093400J/kg material. Therefore, the smelting of ferromolybdenum mainly uses silicon as the reducing agent and aluminum as the auxiliary reducing agent; the smelting of ferrotungsten mainly uses aluminum as the reducing agent. The amount of oxygen released from tungsten concentrate is high, so the additional amount of oxygen added in smelting ferrotungsten is less, the amount of iron ore (iron and phosphorus) added is less than that of smelting ferromolybdenum, and the amount of nitric acid added is very small. Due to the different grades of ferrotungsten and ferromolybdenum alloys, steel scraps need to be added to increase the amount of iron when making ferromolybdenum, while steel scraps do not need to be added when making ferrotungsten.

 

ferro molybdenum 60 price per kg

ferro molybdenum 60


Therefore, during the production process, it is necessary to minimize the loss of material flying during mixing and loading, and to recycle powder. In order to ensure the recovery rate, the finishing chips, rich slag, splashes, crushed iron particles from the cooling system, and dust in all dust collectors should be recovered (re-refined) in a timely manner.

Send Inquiry

Home

Phone

E-mail

Inquiry