Zhen An recently completed a new shipment of Ferrovanadium 80 for overseas steelmaking clients. This batch of FeV80 lumps was prepared for alloy steel, HSLA steel, tool steel and other vanadium-bearing steel applications.
For steel plants, Ferrovanadium 80 is not only a vanadium source. It is an alloy additive used to improve strength, toughness, wear resistance and grain refinement in steel production. Compared with lower-vanadium grades, FeV80 contains a higher vanadium percentage, which allows steelmakers to add less total alloy material while achieving the required vanadium target.
During this shipment, Zhen An focused on three practical points: stable chemical composition, suitable lump size and reliable export packing. Before delivery, the batch was checked according to customer requirements, including vanadium content, Al, Si, C, P, S and size distribution. COA documents were prepared, and third-party inspection can be accepted before shipment when requested.
For long-distance transportation, proper packing is especially important. Ferrovanadium lumps should be protected from moisture, rough handling and excessive breakage during loading and sea shipment. Stable lump size helps buyers reduce fines, improve feeding convenience and support more consistent alloy addition at the steel plant.
This export update reflects the growing demand for vanadium alloy additives in global steelmaking. For buyers producing HSLA steel, tool steel or special alloy steel, choosing a reliable Ferrovanadium 80 supplier is not only about price. Batch stability, inspection support, packing quality and delivery coordination are equally important.
Zhen An supplies Ferrovanadium 80 and Ferrovanadium 50 for steel mills and alloy producers. Buyers can send required grade, vanadium content, lump size, quantity, destination port and inspection requirements to receive updated specifications and quotation details.
Need Ferrovanadium 80 for your next steelmaking order?
Send us your required vanadium content, lump size, quantity and destination port. Zhen An can provide current specifications, COA support and export packing details.
Website: www.za-refractory.com
Email: marketing@zanewmetal.com
FAQ
Q:What is Ferrovanadium 80 used for?
A:Ferrovanadium 80 is mainly used as a vanadium alloy additive in steelmaking. It is commonly used in HSLA steel, tool steel, high-speed steel and special alloy steel to improve strength, toughness, wear resistance and grain refinement.
Q:What is the common size of FeV80 lumps?
A:Common Ferrovanadium 80 lump size is usually 10–50mm. Customized sizing can also be supplied according to the buyer's feeding method and furnace process.
Q:Why is FeV80 preferred in some steelmaking applications?
A:FeV80 contains higher vanadium content, so steelmakers can use a lower total addition amount to reach the target vanadium level. It is often preferred when precise alloy control and lower impurity input are required.
Q:Can ZhenAn provide COA or third-party inspection?
A:Yes. Zhen An can provide COA for each batch. Third-party inspection before shipment is also accepted, including SGS, BV, Intertek or other internationally recognized inspection agencies.
