1. Improper addition amount
If too little 75 ferrosilicon is added, the deoxidation effect may be poor; if too much is added, the plasticity and toughness of the steel may be affected. Solution: According to the requirements of the steelmaking process, reasonably calculate the required amount of 75 ferrosilicon to ensure that it is within a reasonable range.
ferro silicon alloy Supplier
2. Uneven mixing
If the 75 ferrosilicon and molten steel are not mixed evenly, it may lead to insufficient reaction during the steelmaking process, affecting the quality and performance of the steel. Solution: Use a reasonable mixing method to ensure that ferrosilicon and molten steel are fully mixed.
silicon ferro Supplier
3. Violent reaction
If the reaction is too violent when adding 75 ferrosilicon, it may cause safety problems. Solution: Pay attention to the adding method and speed to avoid causing violent reactions.
