High Carbide Ferromanganese 75
Ferromanganese is divided into three categories according to its carbon content:
Low carbon category: carbon no more than 0.7%
Medium carbon type: carbon is no more than 0.7% to 2.0%
High carbon category: carbon no more than 2.0% to 8.0%

High Carbide Ferromanganese 65
concept:
Electric furnace high carbon ferromanganese: Electric furnace high carbon ferromanganese is a Mn-Fe-C ternary alloy containing a small amount of silicon, phosphorus, and sulfur impurities. The sum of manganese and iron in ferromanganese is about 92%, and the carbon content is 6%-7 %.
Blast furnace high carbon ferromanganese: The blast furnace method is the earliest method used in the production of high carbon ferromanganese. This method uses coke as the reducing agent and heat source, dolomite or lime as the flux, and uses a blast furnace to produce high-carbon ferromanganese.

Emm Manganese 65
Medium and low carbon ferromanganese: Medium and low carbon ferromanganese is mainly an alloy composed of two elements: manganese and iron. The melting point is close to 1300°C and the density is 7.2-7.3g/cm3; depending on its carbon content, medium and low carbon ferromanganese It can be divided into low carbon ferromanganese with a carbon content of less than 0.7% and medium carbon ferromanganese with a carbon content of 0.7%-2.0%.


