Mar 14, 2024 Leave a message

Introduction To The Smelting Method Of Ferrovanadium

Silicon thermal method
Flake vanadium pentoxide uses 75% ferrosilicon and a small amount of aluminum as reducing agent, and is refined in an alkaline electric arc furnace through two stages of reduction and refining to obtain qualified products. During the reduction period, all the reducing agents in one furnace and 60-70% of the total flaky vanadium pentoxide are put into the electric furnace, and silicon thermal reduction is carried out under high calcium oxide slag. When the V2O5 in the slag is less than 0.35%, the slag is released (called lean slag, which can be discarded or used as building materials) and enters the refining period.

 

Ferro Vanadium 60

FeV60


At this time, flake vanadium pentoxide and lime are added to remove excess silicon, aluminum, etc. in the alloy liquid. Once the alloy composition reaches the requirements, the slag and ferrous alloy can be discharged. The slag released in the later stage of refining is called rich slag (containing V2O5 up to 8-12%) and will be returned to the furnace for reuse when charging begins in the next furnace. The alloy liquid is generally cast into cylindrical ingots, and the finished product is obtained after cooling, demoulding, crushing and slag removal. This method is generally used for smelting ferrovanadium containing 40 to 60% vanadium. The recovery rate of vanadium can reach 98%. Refining each ton of ferrovanadium consumes about 1,600 kilowatt hours of electricity.

 

Ferro Vanadium 80

FeV80

Thermite method uses aluminum as the reducing agent and smelts using the lower ignition method in a furnace barrel lined with an alkaline furnace. First put a small part of the mixed charge into the reactor and ignite it. After the reaction starts, add the remaining materials one after another. It is usually used to smelt high-vanadium iron (containing 60-80% vanadium). The recovery rate is slightly lower than that of electrosilicothermal method, about 90-95%.

Send Inquiry

Home

Phone

E-mail

Inquiry