Molybdenum plate is made by rolling molybdenum plate billets, usually with a thickness of 2-30 mm. After being manufactured by different types of rolling mills, the coils provided are called molybdenum strips. Cold-rolled molybdenum plates are rolled in multiple passes at room temperature to make the molybdenum plates reach the required thickness (commonly 0.02-5mm). This processing method can significantly improve the material's strength limit (up to 700-1400MPa) and hardness (HV200-350), while maintaining good ductility (elongation 3-15%). For extremely thin plates with a thickness of less than 0.5mm, an intermediate annealing process is often required to improve formability.
High purity molybdenum plate product details picture display
High purity molybdenum plate
High purity molybdenum foil
