Dec 15, 2023 Leave a message

Introduction To The Performance Characteristics And Applications Of Silicon Nitride Materials

Low Impurity Content Ferrosilicon Nitride Alloy

 

Advantages of silicon nitride ceramics:

1. Heat resistance. Under normal pressure, Si3N4 has no melting point and decomposes directly at around 1870°C. It can withstand oxidation up to 1400°C and can actually be used up to 1200°C (mechanical strength will decrease if it exceeds 1200°C).

2. High mechanical strength, hardness close to corundum, self-lubricating and wear-resistant. The room temperature flexural strength can be as high as 980MPa or more, which is comparable to alloy steel, and the strength can be maintained until 1200° without decreasing.

3. High thermal stability, small thermal expansion coefficient, high thermal conductivity, good thermal shock resistance, and will not crack under thermal shock from room temperature to 1000°C.

 

Low Impurity Content Ferrosilicon Nitride Alloy

Ferrosilicon Nitride Alloy for Steelmake

 

4. Stable chemical properties and corrosion resistance. Except for hydrofluoric acid, it does not react with other inorganic acids. It is corrosion resistant to caustic soda (NaOH) solutions with a concentration below 30%. It can also withstand the erosion of many organic substances and is resistant to various non-ferrous metal melts. (Especially liquid aluminum) is non-wetting and can withstand strong radiation exposure. It does not react with oxygen in a dry atmosphere of 800°C. When the temperature exceeds 800°C, a silicon oxide film begins to form on the surface. As the temperature increases, the silicon oxide film gradually becomes stable. At about 1000°C, it can form a dense silicon oxide film with oxygen. It can remain basically stable up to 1400℃.

5. Low density, small specific gravity, only 2/5 of steel, and good electrical insulation.

6. Silicon nitride ceramics also have good microwave transmission properties, dielectric properties and high-temperature strength, and can be used as radar radomes for missiles and aircraft.

 

 

Metal nitride Ferrosilicon nitride lumps

Nitrided Ferro Silicon

 

Application fields of silicon nitride materials:

Aerospace and military industry, mechanical engineering, ultra-fine grinding, automotive internal combustion engine materials, diesel engine glow plugs (glow plugs), metallurgy and high-performance machine tool cutting tools.

Send Inquiry

Home

Phone

E-mail

Inquiry