Jan 08, 2024 Leave a message

Knowledge Related To Processing And Loading Of High Carbon Ferrochrome

Ferro Chrome Alloy

 

 

In the actual production of high-carbon ferrochrome, it is often necessary to select the appropriate mineral mix and mix ratio. The processing and loading of high carbon ferrochrome is also an issue that needs to be understood.

 

carbon ferro chrome

Ferrochromium Price

 

High carbon chromite ore is crushed between the fixed jaw plate and the movable jaw plate. When the eccentric shaft rotates, the connecting rod and push pull make the movable jaw plate reciprocate back and forth to achieve the purpose of crushing ore and discharging the ore. Mine thermal protection requires that the particle size of coke is smaller than that of ore. Raw materials or coke that require small particle size for smelting can be crushed using a double-roller crusher. After the high-carbon ferrochrome raw materials are crushed, they are then screened, weighed and batched, then sent to the furnace top silo, where they are added to the furnace through the material tube or sent to the feeding platform.

 

ferro chrome alloy

Ferrous Chrome

 

The feeding equipment and weighing need to be simple and reliable. There are currently two feeding methods: one is to use a belt conveyor to deliver the materials to the silo, and then mix the materials in the batching truck according to the batching ratio and unload them into the furnace top silo. . Another loading method is to use a loading trolley to transport the furnace section to the furnace top platform along the inclined bridge.

Send Inquiry

Home

Phone

E-mail

Inquiry