Carbon Ferro Manganese
(1) Large batch sampling verification: when the batch size is less than 10t, no less than 15 small samples should be randomly taken from different parts of high carbon ferromanganese; when the batch size is more than 10t but less than 30t, no less than 15 small samples should be randomly taken from different parts of high carbon ferromanganese 25 small samples; when the batch size is more than 30t, no less than 30 small samples should be randomly taken from different parts of high carbon ferromanganese.

Ferro Mn
The weight of each sample should be approximately equal, and its block size should be no less than 2020mm. The total amount of high carbon ferromanganese sampled shall not be less than 0.03% of the batch. The high-carbon ferromanganese samples taken should all be crushed to less than 10mm, divided into 1.2kg using the quartering method, mixed and divided into two equal parts, one part for analysis and one part for retention.
(2) Packaging verification sampling: No less than 10% of the packages in each batch should be randomly selected. Randomly select a high-carbon ferromanganese sample of approximately the same weight from each piece, with a block size of not less than 2020mm. The total number of high-carbon ferromanganese samples shall not be less than 12, and a maximum of 30.

Emm Manganese
The high-carbon ferromanganese samples taken should all be crushed to less than 10mm, divided into 1.2kg using the quartering method, mixed and divided into two equal parts, one part for analysis and one part for retention.


