Jul 17, 2023 Leave a message

Molding And Production Rules Of Silicon Brick

Molding and production rules of silicon brick

 

The raw material for making silicon bricks is silica. The higher the SiO2 content of silica raw materials, the higher the refractoriness. The most harmful impurities are Al2O3, K2O, Na2O, etc., which seriously reduce the refractoriness of refractory products. Silica brick with SiO2 content of not less than 96% silica as raw materials, adding mineralizing agents (such as iron scale, lime milk) and bonding agents (such as molasses, sulfite pulp waste liquid), through mixing, molding, drying, burning and other processes to produce.

Molding and production rules of silicon brick

When preparing silicon brick mud, a certain amount of waste silicon brick is usually added to the mix, which aims to reduce the expansion and stress generated during the firing of the product, reduce the generation of cracks, and improve the yield. The amount added is related to the shape and weight of the brick. For special-shaped bricks weighing less than 25Kg, 20% can be added: more than 25Kg special-shaped bricks can be added 30% : for special special-shaped bricks, 30% can be added. When adding waste silicon bricks, attention should be paid to such problems, adding too much will reduce the refractoriness and mechanical strength of the product, and increase the porosity. Therefore, the amount of waste brick should not be too much.

Send Inquiry

Home

Phone

E-mail

Inquiry