Physical and chemical index of silicon brick
Silica brick in 300℃ above to close to the melting point (scale quartz or cristolite) of this interval silica brick volume stability, when heating to 1450℃ when about 1.5% to 2.2% volume expansion, is conducive to ensuring the structural strength and air tightness of masonry.

The properties and technological processes of silicon bricks are closely related to the crystal transformation of SiO2, and the true density of silicon bricks is one of the important indicators to judge the degree of crystal transformation. Therefore, the true density is two important quality indicators of silicon brick. - The general requirement is below 2.38g /cm3, and the silicon brick should be below 2.35g /cm3. The true density is small, reflecting the amount of squamous quartz and cristobalite in the brick, the amount of residual quartz is small, so the residual expansion is small, and the strength decline in use is small.


