Smelting of high manganese steel is not only high smelting temperature, but also the smelting conditions are relatively harsh, Fe, Si, Ai, Mn, C in the liquid steel, CaO in the slag, SiO2, FeO and other elements of the furnace lining erosion is very serious. This leads to a significant reduction in the service life of the furnace lining. At this time the use of magnesium, magnesium-aluminum or magnesium-chromium dry knotted material (which is often referred to as alkaline furnace lining materials), can better solve the problem.

Magnesium furnace lining refractory material is the main component of MgO. MgO itself is a high melting point material, at the same time MgO + (FeO, Fe2O3) = MgO.Fe2O3, MgO and Fe2O3 can be synthesized into magnesia ferrite (MgO.Fe2O3), this compound can be generated with the solid fusion of MgO, the two substances are high-temperature refractory materials. In order to make the furnace lining layer has a high refractoriness, so that the furnace lining in the MgO to reach a certain content. If the MgO content is low, Fe2O3 will work with CaO to generate low melting point of calcium ferrate.

It is alkaline at high temperature, does not react with metal oxides such as MnO and Cr2O3 in the molten steel, and has strong resistance to molten steel erosion. Therefore, it can effectively extend the service life of the furnace lining It can be seen that the selection of furnace lining materials according to the steel melted to choose. It is also necessary to give full consideration to the composition of the slag, the melting temperature and the gas phase volatilization at high temperatures.

The advantages of magnesium furnace lining refractories are: 1, lower cost, 2, not easy to crack, seepage and leakage of steel and other accidents such as lower rate (the cracks mentioned here are mainly transverse cracks. Small longitudinal cracks are alkaline dry knotted material of the mineral structure, chemical composition and knotted density, melting results and other factors specific) 3, thin sintered layer, easy to dismantle the furnace. 4, the back of the furnace lining of dry knotted material is not sintered, lower density, better heat preservation. 5, does not contain moisture, etc.. Therefore, magnesium dry knotted material knotted furnace lining can be used directly without baking.

If you are interested refractory products, contact us now!
Email: info@zaferroalloy.com Whatsapp: 8615896822096


