Jan 24, 2024 Leave a message

Target Manufacturing Method

Tungsten Sputtering Target factpry
 

Target manufacturing method

1. Casting method

The casting method is to smelt alloy raw materials with a certain composition ratio, and then pour the smelted alloy solution into a mold to form an ingot, which is then machined to form a target. Casting methods generally require melting and casting in a vacuum. Common casting methods include: vacuum induction melting, vacuum arc melting and vacuum electron bombardment melting. Its advantages are that the target material produced has low impurity content, high density, and can be used on large-scale targets. Chemical production; the disadvantage is that if two or more metals with large differences in melting point and density are smelted, it is difficult to make an alloy target with uniform composition by conventional smelting methods.

2. Powder metallurgy method

The powder metallurgy method is to smelt alloy raw materials with a certain proportion of ingredients, then cast the alloy solution obtained after smelting into an ingot, crush the cast ingot, statically press the crushed powder into shape, and then sinter it at high temperature to form a target. material. The advantage of the target material made in this way is that the composition is uniform; the disadvantage is that the density is low and the impurity content is high. Commonly used powder metallurgy industries include cold pressing, vacuum hot pressing and hot isostatic pressing.

 

80%  W Sputtering Targets

80% Tungsten Sputtering Targets
 

 

80%  W Sputtering Targets

80% W Sputtering Targets
 

Send Inquiry

Home

Phone

E-mail

Inquiry