Silicon Slag Briquettes
Storage environment: Silicone carbon balls should be stored in a dry and ventilated environment to avoid contact with moisture to prevent the oxidation reaction from aggravating.
Moisture treatment: If the silicone carbon ball gets damp, it should be dried as soon as possible to prevent the oxidation reaction from aggravating. You can use a desiccant or place it in a well-ventilated area to dry.
Silicon Carbide Briquettes 50
Uniform stirring: When putting silicon carbon balls into the molten pool, they should be stirred evenly to ensure that they are evenly dispersed in the molten pool and avoid excessive local concentration.
Pay close attention to the temperature of the molten pool: After adding silicon carbon balls, you should pay close attention to the changes in the temperature of the molten pool. If the temperature is too high, it may cause excessive oxidation of the molten steel and affect the quality of the molten steel; if the temperature is too low, the expected smelting effect may not be achieved.
FeSi Briquette 50
Avoid contact with air: During operation, try to avoid contact between silicon carbon balls and air to prevent their oxidation reaction from aggravating.
In short, adding silicon carbon balls during steelmaking requires a lot of attention to details. Operators need to strictly control various parameters to ensure control of adding timing, addition amount, quality, etc., in order to obtain better smelting results.
