Jan 11, 2024 Leave a message

New Production Process Of High Carbon Ferromanganese

Ferro Manganese Price

 

(1) Using electronic computer control technology, it can control the amount of carbon, adjust electrodes, store data, control the batch weighing system and feeding and transportation system, so that the electric furnace operation is stable, the power consumption is reduced (an average of 12%), and the operating time is increased. Extended furnace life. It has been widely adopted by various countries.

 

 

Free Silicon Carbon Alloy

Low Carbon Ferro Manganese

 

(2) Charge preheating and pre-reduction: When using a closed ferromanganese electric furnace to produce high carbon ferromanganese, the charge is passed through a rotary kiln with a diameter of 3.5m and a length of 75m for preheating and pre-reduction of the manganese ore, and the iron oxide scale and The lime is dried to remove crystal water, and the charge is put into the furnace when the temperature reaches 80°C. The heat source of the rotary kiln comes from the gas of a closed electric furnace. After adopting this method, the production efficiency of the electric furnace is greatly improved, and the power consumption is reduced to 2000kWh/t.

 

HC Silicon

Medium Carbon Ferro Manganese


       (3) Production of high-carbon ferromanganese by slag-retaining method: The characteristic of this process is that the resistance heat of slag is used instead of arc heat, which promotes the expansion of the reaction zone in the furnace, thereby reducing power consumption and improving element recovery rate and production capacity.

Send Inquiry

Home

Phone

E-mail

Inquiry