1. Ordinary high alumina bricks
The main mineral composition of this brick is mullite, corundum and glass phase. As the Al2O3 content in the product increases, mullite and corundum also increase, the glass phase will decrease accordingly, and the refractory resistance and high temperature performance of the product will increase accordingly. Ordinary high alumina bricks have a series of better fire resistance properties than clay products. They are a material with good application effects and wide use. They are widely used in various thermal kilns. Compared with clay products, it can effectively extend the service life of the kiln.

2. High load soft high alumina brick
Compared with ordinary high-alumina bricks, the difference between high-loaded soft high-alumina bricks is the matrix part and the binder part: in addition to adding three-stone concentrate, the matrix part is reasonably introduced according to the theoretical composition of the chemical composition after burning close to mullite. For high-aluminum materials, such as corundum powder, high-aluminum corundum powder, etc., the binding agent should be high-quality clay. Depending on the type, different clay composite binders or mullite binders should be used. Through the above method, the load softening temperature of high alumina bricks can be increased by about 50-70°C.

3. Low creep high alumina bricks
The creep resistance of high alumina bricks is improved by employing so-called unequilibrated reactions. That is, according to the operating temperature of the kiln, three-stone minerals, activated alumina, etc. are added to the matrix to make the composition of the matrix close to or completely composed of mullite, because the mulliteization of the matrix will definitely increase the mullite content of the material. , reducing the glass phase content, and the excellent mechanical properties of mullite are conducive to improving the high-temperature performance of the material. In order to completely mullite the matrix, controlling Al2O3/SiO2 is key. Low creep high alumina bricks are widely used in thermal kilns such as hot blast furnaces and blast furnaces.

4. Phosphate bonded high alumina bricks
Phosphate bonded high alumina bricks are made of dense special-grade or first-grade high-alumina bauxite clinker as the main raw material, phosphate solution or aluminum phosphate solution as the binding agent, and are formed by semi-dry machine pressing and heat treatment at 400-600°C. Chemical bonded refractory products are unfired bricks. In order to avoid large shrinkage of the product during use, heating-expandable raw materials, such as kyanite, silica, etc., are generally introduced into the ingredients. Compared with ceramic-bonded fired high-alumina bricks, its spalling resistance is better, but its softening temperature under load is lower and its corrosion resistance is poor. Therefore, a small amount of fused corundum, mullite, etc. needs to be added to strengthen the matrix. . Phosphate bonded high alumina bricks are widely used in cement rotary kilns, electric furnace roofs and other kiln parts.
5. Micro-expansion high alumina bricks
The brick is mainly made of high alumina brick bauxite as the main raw material and according to the production process of high alumina brick. In order to make the high alumina bricks expand appropriately during use, the key is to select the "three stone" (kyanite, sillimanite, andalusite) concentrate and its particle size, control the firing temperature, and make the selected three stone mineral parts Mulliteization, leaving part of the three-stone minerals. The remaining three-stone minerals are further mulliteized during use, accompanied by volume expansion. It is better to choose composite materials for the three-stone minerals. Because the decomposition temperatures of three-stone minerals are different, the expansion caused by mullite formation is also different. Utilizing this feature, the high-alumina bricks have corresponding expansion effects due to different working temperatures, squeezing the brick joints and improving the overall compactness of the lining, thereby improving the brick's resistance to slag penetration.


