Nitrided Low Carbon Ferro Chrome Lump
If the melting point of the slag is low and the temperature in the furnace is also low, the slag can be discharged at this time, but the molten iron is difficult to discharge due to the low superheat. There will be a phenomenon of less iron and more slag. In severe cases, only slag will be discharged but no iron will be discharged. This will cause A big loss.
Nitrided Ferro Chrome Lump
High carbon ferrochromium alloy slag is a high-quality basalt-like building material. Various types of concrete are used to process it, which has advantages that other stones do not have. High carbon ferrochromium alloy slag is processed into gravel, which has the characteristics of high strength and particularly rough surface. The strength of high-carbon ferrochromium alloy slag gravel will be greater than that of limestone when it absorbs water and has pores, and is similar to basalt.
Medium Carbon Ferro Chrome Lump
High-carbon ferrochromium alloy slag is porous and has good strength, which is conducive to absorbing the deformation caused by heat during the hardening process of concrete. High carbon ferrochromium alloy slag gravel has good resistance to alkali aggregate reaction. Therefore, after processing, high carbon ferrochromium alloy slag is undoubtedly a good building material and a new building material.
